Showing posts with label NFT. Show all posts
Showing posts with label NFT. Show all posts

Thursday, July 3, 2014

Okra in Aquaponics

It has been awhile since I've posted.  As I've written before, there is not much gardening that goes on in South Florida once the rainy season starts.  Our temperatures are in the 90's almost everyday.  In the month of June we had over 15" of rain and that was before our first brush with tropical weather.  To say that it is hot and humid would be like saying the Atlantic Ocean has a little water in it.

It is very hard to grow anything edible in those conditions (well except that the mangoes and avocados are getting ripe).  The irony of all ironies is that I can grow a few things using aquaponic techniques during this time.  Yes, plants that would drown from all the rain if they were planted in soil will do OK if they are planted in water.  They just must be plants that can take the heat.

Right now in my at home aquaponic gardens, I have purple hull peas, mint, lemon balm, rosemary, vinca, french marigold, oregano, miniature pepper,  green onion, and lots of okra growing.  The okra are the plants from the Floaters versus Sinkers seed wars I chronicled.  As I suspected, there is really no difference between the floater and sinker seeds once the seedlings were planted.

However I am seeing a difference in how the okra is growing using different techniques.  Unfortunately I don't have photos of  the plants that were growing the best.  These were the plants that were in NFT tubes.  Even though the okra variety is Cajun Jewel, a dwarf variety, they still get several feet tall.  Once I could no longer reach the plants in the tubes, I had to take them out and transplant them.  This involved pruning both roots and tops.  I re-established them in my newest  media grow bed with my purple hull peas and due to the pruning they are now the smallest of the plants.  Bonsai okra so to speak.

okra in aquaponicsThe okra in the DWC (deep water culture) rafts are growing steadily.  However they have not flowered and produced fruit yet.  As you can see, the plants are exceptionally healthy and should be flowering any day now.  By the way, the crud on the raft is caterpillar poo.  Hubby thought it would be nifty to put some zinnias on the raft, but instead grabbed some of my milkweed seedlings.  Needless to say it only took a few days to have monarch eggs and within 10 days they had hatched, eaten every bit of milkweed on the raft, and then conscripted into the caterpillar relocation program (CRP).

The okra that were planted in media beds filled with hydroton and gravel are also doing well.  They have just started to flower.  What is odd about this set outperforming the set in the raft is these plants receive an eastern exposure.  The plants in the raft get a southern exposure.  Southern exposure equals more sun, however the eastern exposure plants are outperforming their southern kin.  I know that there are people sold on DWC for all plants, but it has been my experience that in most instances plants in media beds do better.  Maybe I am doing something wrong, but I get more nitrates using a media bed than depending on the biofilm on the raft.

The current superstar okra (since their kin in the NFT tubes got the bonsai treatment) are the okra that are in a bed of lava rock and a small layer of gravel.  I really don't like planting in lava rock because even with gloves on your hands it is hard work and always seems to ruin my manicure.  But those lava rocks provide an incredible amount of specific surface area for the nitrifying bacteria to take hold.  The honeycomb
structure is similar to zeolite.  These okra plants have already begin to bloom, fruit, and produce their first harvest.  The okra have already crowded out the bottom row of NFT tubes that are mounted over the bed. I am planning on using that tube again when the okra get just a bit taller.  As I did last year, I will use the okra as a shade for other plants on that bottom tube.  This system is getting southern exposure like the DWC system, but it is doing so much better.

I was joking with a fellow gardener on-line this morning that I know so much useless information about okra.  It is in the same family as the hibiscus and cotton.  If you have ever seen an okra bloom, you know that they are very beautiful flowers.  And if you time time to actually look at an okra bud and bloom then you can easily see how hibiscus and okra are related.  The buds and flowers are shaped in a very similar manner.
okra in aquaponics bloom
I know lots of people don't like okra, but I think you just have to give it a chance.  It is only slimy if you boil it.  People eat oysters and they are slimy!  If you have an overabundance of okra, pick it while it is small and make pickles.  I like them pickled hot, bread and butter, or dill style.  I don't think I have ever made the acquaintance of an okra pickle that I didn't like.  I can't say the same for cucumber pickles.  Besides what would gumbo be without okra?  Okra is the defining ingredient in gumbo.  If it isn't thickened with okra, then it is just another soup. And okra makes an excellent fried vegetable. 

 By the way, I planted some of my okra seedlings in soil on the same day as I placed the others in the aquaponic gardens.  I've even given them a little fish emulsion to try to make things even.  The growth of the plants in soil can't be compared to even the slowest growth of the plants in the DWC system.  The soil based plants are not as richly colored and have not produced a bud or bloom yet. Their leaves are smaller and the plant stems thinner.  But they do attract visitors.  I wonder if this monarch is related to any of the 'pilars that started out on the DWC raft?  

If you have never tried to grow okra, I encourage to give it a shot. It is very forgiving and once it gets going is a prolific producer.  Even if you grow in soil, I still recommend growing the dwarf varieties because okra can get tall.  And last but not least, be sure to save some of your seed.  All of these plants are from last year's seed.

OK, I've shown you my okra......let's see yours!

Friday, March 14, 2014

Krazy for Kohlrabi!

Kohlrabi is a forgotten gem.  With the resurgence in interest in heirloom and other older vegetables kohlrabi may be poised for a comeback.  Look at how kale is the current trendy food when not too long ago it was eaten only because it was cheap and easy to grow.

Kohlrabi is the royal cabbage.  While it looks like a root vegetable, it is actually the stem of the plant you eat.  The name comes from the German for Cabbage Turnip.  When you look at kohlrabi (especially the purple varieties) you can see how it looks a bit like a turnip.  However, it is a member of the Brassica family.  Just like cabbage, broccoli, cauliflower, and brussel sprouts it has been selected by man for the characteristic of the bulging stem.


Looks Like a Turnip Tastes Like Broccoli


I am currently growing them using a flood and drain grow bed, deep water culture rafts, and nutrient film technique tubes.  Much to my surprise they are growing best with NFT.  I really thought they would excel in the grow beds and that they would be too top heavy for rafts or tubes. 

They do lean in DWC rafts and for some reason their bulb becomes elongated.  Doesn't change the taste but if you are growing for looks, well it looks odd. 
Leaning Tower of Kolhrabi


If you are growing for looks, you probably aren't growing kohlrabi to begin with because well
                     it is an odd looking veggie.
                                                                 Isn't it?







Kohlrabi can be eaten raw or cooked.  The taste is like the stem of the broccoli with a little bite of radish thrown in for a kick.  The smaller the "bulb" the more tender it is.  No matter the size, you certainly want to peel it before you eat it cooked or raw.  It has a very tough outer skin.

It is used in Asian and German cooking.  I prefer it cooked, but that is probably because that is how my Mom cooked it. 

If you look on the internet, you will find recipes for cooking the bulb and leaves.  I've never eaten the leaves....I was taught incorrectly that the stems and leaves were toxic to humans.  As an adult, I realize my Dad probably just said that because he didn't like the leaves. 

If you want to try it for yourself, it is very easy to grow in soil or in an aquaponic garden.  It likes cooler temperatures so you can direct sow seeds outdoors 4 to 6 weeks before your last frost.  So get them in the ground soon! They like a pH in the 6's and they need water to develop that fleshy stem.  If you grow in soil, beware that they have shallow roots.  Keep them well mulched if using soil. I haven't had a problem with cabbage worms but I did have to spray for aphids with my pepper/garlic spray (read about that here) on one set of tubes.  If using aquaponics, give them a try in NFT tubes.  I've been getting great results in both small and large tubes.

Are you krazy as I am for kohlrabi?

Tuesday, January 14, 2014

Octopus Slayer - Part 2

If you remember from a prior post last year, we made some changes to the large A-Frame NFT system that was being used over at the Together We Stand Aquaponic Gardens.  It had been designed with a manifold at the top to feed water individually at each tube and to drain each tube individually. It had so many hoses going so many directions we called it the "octopus".  Classic exacmple of over-engineering to solve a problem that didn't exist.

When I wrote about how we changed the water flow I mentioned that instead of black tubing, my hubby cut a garden hose to make the jumper from one tube to the next. It was easy, quick, and most importantly cheap!

After I posted this, several folks commented on this blog and other places about the wisdom of using a garden hose. There was quite a bit of concern about the safety of the water flowing through the garden hose and the possibility of leaching toxic chemicals.

Quite honestly, for as "smart" and evolved as we are supposed to be, it never occurred to us that the hose might taint the water.  Hubby and I  both grew up in a very hot and dry area of South Texas and drank lots of water from the hose as youngsters and teens. While it did have a funny taste, I just always guessed it was from the metal bib of the hose.  That and the fact that all the water in that town tasted like crud, no matter the source.  But when you are hot and thirsty you will drink what is available.  Of course, this was back in the 60's and 70's so we didn't know about things like bottled water back then

But this is a new century and we are evolved and enlightened!  So a few days ago, hubby decided that the garden hose should be replaced.  You spoke and he listened!


 This did require a trip to Home Depot, but it was only a few dollars and the result looks clean and works well.  I think fighting the crowd of Canadians in the parking lot and through the store on a Saturday (remember this is Hollywood Florida and it is January and in the mid-80's so all the snowbirds have landed) took longer and was more effort than making the actual change.  Here is the new set-up. 
Here is another view.

Nice huh?

But this gets me to thinking about all the things we did as kids that people never do now....or they don't allow their kids to do now.  Maybe it was because we were from a small-ish town, but we rode our bikes everywhere and got into everything. I don't know how we survived.

How about you?

Monday, September 23, 2013

Don't Overthink or Over Engineer Your Systems

It is so easy to get carried away with the physics involved in building your aquaponic grow systems that the  simple becomes unduly complex.  Complex is not good. Complex is rarely if ever easy to maintain. Try to avoid complex as much as possible.

If you think effort goes into designing a large system, just try to re-design a large system after all components are in place but not functioning as they should.  Implementing the re-design means that you have re-do all the previous hard work.  Not efficient use of time or energy.  If you and your garden want  to survive, you need to use your time and energy as efficiently as possible.

The following is a great case in point of over designing a system.  When the a frames for NFT (nutrient film technique) tubes were first designed and built for the Together We Stand project, the designer was greatly concerned that because the water was going to flow through 4 tubes before draining that all the nutrients would be absorbed by the plants on the top row and the plants in rows 2 through 4 would be nutrient starved.  So a complex manifold system was created and installed to give equal feed of the nutrient rich water into the top of the a-frame.  Truly a beautiful design as you can see from here.
Since each A-Frame has two sides, there was a manifold for each side of the frame.  Of course, this system over engineered a problem that didn't exist.  See, the nutrient levels at the top tube of an A-Frame are not significantly lower than the bottom tubes unless your system is extremely nutrient deficient. So, this overly complex design solved a problem that didn't exist.  However what it did do was utilize flow tubing that was so small you didn't get good water flow and it clogged constantly. In addition, since each tube was fed individually, it drained individually.  If you think that manifold was something, then check out this drain system

Looks like some kind of octopus, right?  In addition, note the use of clear tubing.  Well it was clear at the start I am sure.  But because the clear tubing allows sunlight to penetrate, algae growth was a constant problem and because of the design, 8 drain tubes needed to be cleaned on a regular basis.  All to solve a nutrient feed problem that doesn't exist!

The answer was to re-plumb the A-frame so that water enters in one location on each side of the frame and then feeds and drains each tube in sequence.  

So that anyone working on the system in the future will understand how it operates, each tube was marked at the feed and drain points and also with arrows indicating water flow.
 Note the use of dark tubing for the inlet feed tubing.  For the jumper lines between the tubes, in a stroke of genius my husband realized that garden hose would work perfectly and is certainly less expensive than other hosing. 
Since there is now only 1 drain for each side of the frame, only 2 drains are necessary.  That means we can slay the octopus and the task associated with keeping the lines clean.
It was a bit of a pain, but now these A-Frames will perform their NFT tasks much more effectively and will require much less effort to maintain. 

As a side note, you will notice in some of the photos that the tubes are marked with letters and numbers.  This is something that was implemented back when this shade house was first built.  It was done to help keep crop and maintenance records.  Even if your garden is small, if you have more than one grow bed, NFT tube system or multiple raft beds I highly recommend that you develop some sort of identification system to make your record keeping much easier.

So how did you spend your week-end?